Jensen Tina II Cherry or Walnut Spinning Wheel spins like a dream.
Jensen Tina II Cherry or Walnut includes *US shipping
TINA II - JENSEN'S UPRIGHT TRAVELLER WHEEL
Each Jensen wheel has crafted by master craftsman, Mr. Jerry Jensen for over 40 years, and is signed and numbered. The JENSEN TINA II has an 18 inch wheel with ball bearings and it includes 3 bobbins, half spokes, threading hook, and a flax distaff at no extra charge. The Jensen Tina II has both double drive and scotch tension. The flax distaff may be placed on either the right or left. The 3/8 inch brass orifice is 30" from the floor. Tina II stands 38 in. high, 14 in. deep and 18 in. wide. It weighs approximately 13 lbs. Minimal assembly required.
Wheels are UNFINISHED Cherry or Walnut.
EVERY Jensen item is entirely made by Mr. Jensen. Any additional bobbins and whorls are also made by Mr. Jensen and are genuine Jensen parts.
Additionally, We send you our instructions for finishing a Jensen wheel plus our Spinner's Catalog with small spinnable fiber samples.
We do not offer free shipping on Jensen Wheels - the 100.00 *shipping cost for shipping within the 48 contiguous states is included in the pricing.
STANDARD RATIOS: 7.8:1, 8.5:1, 9:1, 10:1,11:1,12:1
Unfinished Cherry Wheel. Also available in Walnut for an additional 150.00
OPTIONAL ACCESSORIES which can be purchased separately include:
High Speed Kit Ratios: Whorl #4= 13:1 & 14:1, Whorl #5= 16:1 & 18:1
Slow Whorl#0: ratio is 4.5:1
3-Bobbin Lazy Kate
4-Bobbin Lazy Kate
High Speed bobbins
Additional Scotch Tension Peg (one comes with wheel)
*Jensen ratios are determined by dividing the diameter of the whorl into wheel diameter. This method is described in Paula Simmon's bookSpinning and Weaving with Wool.
Prices subject to change without notice.
Shipping Weight: 20.00 pounds
Quantity in Basket: None