Call Us to order the Glimakra Looms

STANDARD is a well constructed, sturdy loom that you can use for all types of weaving. It is designed with open side frame allowing you easy access for threading and tie-up. The ratchets for both the warp and cloth beams are conveniently mounted on the outside of the loom so that you can utilize the entire weaving width. It is crafted of pine, all holes are predrilled so that you can add accessories at any time. The Standard is available with counterbalance, or Horizontal or Vertical countermarch.

In the counterbalance tie up the harnesses are balanced against each other. Counterbalance is easy to tie up, easy to treadle, quiet and simple. The disadvantage is that it is limited to balanced tie ups. (An equal # of harnesses against each other) In the countermarch tie up the harnesses are raised or lowered independently of each other. The countermarch is quiet, provides easier treadling, an even shed and more consistent tension: an advantage for multi harness weaving, delicate warps, where tight tension is needed, etc. It does take longer to tie up and adjust. Please request further information from me if needed.

The Standard is available in widths of 39, 47, 59, or 63 inches with 4 harnesses and 6 treadles up to 16 harnesses and 16 treadles. The maximum height with counterbalance is 70 inches, with horizontal countermarch is 72 inches, & with vertical countermarch is 7 inches". Weight is 264 to 319 lbs.

Included with the loom are Reed, 4 rubber non-slip feet, 2 lease sticks, 48 warp sticks, shaft holders, mallet, bench, 1000 Texsolv heddles, tie up kit, and assembly instructions.

We carry all the Glimakra Accessories

Contact us!

Retail Prices effective CALL

    ***CALL for SALE PRICES ***

GLIMAKRA STANDARD LOOMS              

With Horizontal Countermarch

39 inch Weaving Width 4 Shaft/ 6 Treadle - CALL

39 inch Weaving Width 8 Shaft/ 10 Treadle -CALL

39 inch Weaving Width 10 Shaft/ 10 Treadle - CALL

47 inch Weaving Width 4 Shaft/ 6 Treadle - CALL

47 inch Weaving Width 8 Shaft/ 10 Treadle -CALL

47 inch Weaving Width 10 Shaft/ 10 Treadle -CALL

47 inch Weaving Width 12 Shaft/ 14 Treadle - CALL

*47 inch Weaving Width 16 Shaft/ 16 Treadle Special order- CALL

59 inch Weaving Width 4 Shaft/ 6 Treadle CALL

59 inch Weaving Width 8 Shaft/ 10 Treadle CALL

59 inch Weaving Width 10 Shaft/ 10 Treadle CALL

59 inch Weaving Width 12 Shaft/ 14 Treadle - CALL

*59 inch Weaving Width 16 Shaft/ 16 Treadle - Special order - CALL

63 inch Weaving Width 4 Shaft/ 6 Treadle CALL

63 inch Weaving Width 8 Shaft/ 10 Treadle CALL

63 inch Weaving Width 10 Shaft/ 10 Treadle CALL

63 inch Weaving Width 12 Shaft/ 14 Treadle CALL

*63 inch Weaving Width 16 Shaft/ 16 Treadle special order - CALL

* Note: 16 Shaft / 16 Treadle Looms are special order only. 12 shaft looms can now be converted to 16 shaft looms.The 16 shaft looms are built larger to accomodate the 16 shafts.
Note that only the 12 shaft looms can be converted to 16 shafts.

Subst. Vertical Countermarch

(Spec. order) CALL for pricing

Standard looms are also available in counterbalance - Call

GLIMAKRA Julia Loom

26 inch Counterbalance 4 Shaft/ 6 Treadle CALL

26 inch Countermarche 4 Shaft/ 6 Treadle CALL

26" Countermarche 8 Shaft/ 8 Treadle CALL

add shafts #5 to 8 onto a 4 shaft Julia Loom CALL

Julia Bench (25 inches wide) CALL

GLIMAKRA SECTIONAL WARP BEAM KIT for Standard Looms

39 inch CALL

47 inch CALL

59 inch CALL

63 inch CALL

GLIMAKRA SECOND WARP BEAM KIT

39 inch CALL

47 inch CALL

59 inch CALL

63 inch CALL

GLIMAKRA Fly Shuttle Beater Assembly

Call for current prices

GLIMAKRA RADDLES-

Hoop Style with 1/2 inch spacing

27 inch CALL

39 inch CALL

47 inch CALL

59 inch CALL

63 inch CALL

GLIMAKRA STAINLESS STEEL REEDS-4 inch OR 4 3/4 inch High 6, 8, 10, 12, or 15 Dents per inch

5,6,8 or 10 Dent 4 inch height = 2.60 per inch or 4 3/4 inch = CALL per inch

12 or 15 Dent 4 inch height = 2.80 per inch or 4 3/4 inch = CALL -per inch

18, 20, 22.5 or 25 Dent 4 inch height = 3.10 per inch or 4 3/4 inch = CALL per inch

30 or 32 Dent 4 inch height = 3.25 per inch or 4 3/4 inch = CALL per inch

CALL FOR PRICES ON SHAFT DRAW SYSTEM, DRAW HARNESS DEVICE , OPPHAMTA ATTACHMENTS and other items