Jensen Wheels

THERE is one Cherry Tina Traveller Original Wheel nearly ready to ship as of 06-26-21 - CALL TO ORDER!!!!

The Jensen's have reintroduced their little upright spinning wheel which was first produced in 1960. They have named it after their granddaughter TINA and have added their wonderful double treadles which make spinning so effortless. The TINA has a 3/8 in. orifice, which is 30 in. high. It has a heavy 15 in. wheel with ball bearings, double drive & scotch tension single drive, built in lazy kate, 3 whorls, 4 bobbins with a 6 to 8 oz. capacity, & threading hook. The TINA stands 38 in. high, 15 in. deep, and 17 in. wide. Made of solid cherry or walnut, signed and numbered. Tina I has both scotch tension and double drive.
Double Drive Ratios - 6:1, 7:1, 8:1
Scotch Tension Ratios - 6:1,7:1,8:1, 9:1, 10:1, 14:1

OPTIONAL ACCESSORIES which can be purchased separately below include:
Slow Whorl#0 and Super High Speed Whorl #6 for scotch tension only
3-Bobbin Lazy Kate
High Speed bobbins
Regular Bobbins
Additional Scotch Tension Peg (one comes with wheel)

Minimal assembly required. Wheels are UNFINISHED Cherry. We send you our instructions for finishing a Jensen wheel plus additional instructions for the wheel.
*Jensen ratios are determined by dividing the diameter of the whorl into wheel diameter. This method is described in Paula Simmon's book, Spinning and Weaving with Wool.
Prices subject to change without notice.

TINA II - JENSEN'S TINA II TRAVELLER WHEEL. Each Jensen wheel is crafted by master craftsman, Mr. Jerry Jensen for over 40 years, and is signed and numbered. The JENSEN TINA II has an 18 inch wheel with ball bearings and it includes 3 bobbins, half spokes, threading hook, and a flax distaff at no extra charge. The Jensen Tina II has both double drive and scotch tension. The flax distaff may be placed on either the right or left. The 3/8 inch orifice is 30 inches from the floor. Tina II stands 38 in. high, 14 in. deep and 18 in. wide. It weighs approximately 13 lbs.
Standard Ratios: 7.8:1, 8.5:1, 9:1, 10:1,11:1,12:1.

JENSEN Cherry Ashley Wheel Jensen ASHLEY wheels are made of solid cherry by Jerry Jensen in Wisconsin, and are signed and dated. Wheel comes with 3 whorls, 3 bobbins (approx. 6 oz. capacity), Simple Brass Threading Hook, and flax distaff. Half Spokes are included in the price for the Ashley Wheels. No extra charge for Mirror Image Model with flyer on right.
RATIOS FOR THE 30inch Ashley (Ratios are approximate -whorls are hand-turned)
Standard Ratios are 10:1, 12:1, 13.3:1, 15:1, 17:1.