Basket Contents
Quantity in Basket: none


LeClerc Fanny II counterbalance maple loom with shed regulator. Made in Canada. From Bountiful: Your Wheel and Loom Specialists since 1988

LeClerc Fanny II Counterbalance Loom

LeClerc Fanny II Counterbalance Loom
Click Image to Enlarge
Code: DLC-FannyII
Price: $3,314.00
Quantity in Basket: None

Choose Width:
36 inch Counterbalance Fanny II Loom - 3,314.00
45 inch Counterbalance Fanny II Loom - Add 203.00 = 3,517.00
60 inch Counterbalance Fanny II Loom - Add 658.00 = 3,972.00
Substitute Inserted Eye Heddles:
Add Leclerc Bench if desired from dropdown below:
Choose Sectional Beam below if desired:
Sectional beam w 1 inch sections - 36 in - 288.00
Sectional beam w 1 inch sections - 45 in = 349.00
Sectional beam w 1 inch sections - 60 in = 445.00
Sectional beam w 2 inch sections - 36 in - 244.00
Sectional beam w 2 inch sections - 45 in - 270.00
Sectional beam w 2 inch sections - 60 in - 355.00
No sectional beam
Quantity:

Leclerc's 4 Shaft Counterbalance Fanny model Looms have been a favorite of handweavers for over 60 years. There are literally hundreds in operation throughout North America and around the world.
Due to the ease of Treadle reach, the Fanny is favoured by the average weaver for comfort over long weaving sessions. Leclerc's compact, solid design allows weaving a full range of Fabric including Rugs. With that, Leclerc decided to enhance the overall weave-ability by introducing the Fanny II.
All Fanny II model Looms incorporate Leclerc's exclusive Shed Regulator. This unique mechanism provides a quick simple switch from balanced to unbalanced weaves with a minimum of adjustment. This provides the same versatility as a Jack Loom but with the advantage of full control over top and bottom Shed openings offered by the Counterbalance design. The Counterbalance Shed is wide and clean on every pick over the full range of 4 Shaft weaves, including the higher tension Rug designs.
For weaving a full range of 4 Shaft Fabrics, the FANNY II is the choice for price and performance.

STANDARD EQUIPMENT: Steel reed, 12 dents/inch (5dents/cm), 10.5 in. (26.8 cm) wire heddles, 1 boat shuttle 6122-3000, 1 reed and heddle hook 6141-7000, 2 lease sticks and 4 warp rods, 2 cords, 2 aprons, Assembly instructions and Video, Book - Warp and Weave