Louet Wheel Accessories

Louet Finished or Unfinished Regular Bobbin - 32.95
Louet Regular Unfinished OR Lacquer Finished Bobbin for the S10, S51, S10 DT, S51 DT wheels and the new Concept wheels with Irish Tension.. This is our Standard Bobbin Lead (Irish Tension) S10 Bobbin. It fits all older model Bobbin Lead wheels. Lacq

Louet High Speed Bobbin
Louet High Speed Bobbin The high speed bobbin was designed to make it easier to spin finer yarns, by introducing higher ratios. Its ratios are: 6.5:1, 9.5:1 and 15:1 The high speed bobbin will fit on all current and discontinued Louet wheels EXCEPT:

Louet Fatcore Bobbin - Used
The Louet fatcore bobbin was designed to make it easier to spin finer yarns, by introducing the same higher ratios as the high speed bobbin, but also adding a thicker center core to simulate a half full bobbin. This helps allow the wheel to not pull

Louet High Speed Spinning Set - Irish Tension

Louet High-speed spinning set. We have put together a kit to adapt a regular wheel S10, S10 DT, S51, S51DT, S75, S15, S17 to be better suited to spin finer yarns. The high speed spinning set comes with a high-speed flyer, 3 fatcore bobbin

Louet Drive Belt
This Louet drive belt fits ALL Louet wheels except the S40, S45 and Victoria S95/96. There is a separate drive belt for each of these wheels.

Louet Narrow Flyer - Standard w sliding hooks
Narrow Flyer comes standard with all wheels. Narrow flyers are 4"� wide inside. Wheel models S15, S17 and S75 will come with flyers that have stationary hooks. All other wheels will come with flyers that have sliding hooks; same as the High Speed F

Louet High Speed Flyer
High-Speed Flyer - The high speed flyer comes with a sliding hook to allow for fine adjustments of hook position. It is 4" wide inside and has a 3/8" orifice.

Louet Wide Flyer - Bulky
The Louet Wide Flyer is required to operate the bulky bobbin. It is 5” wide inside. This flyer is required if you are using bulky bobbins.

Louet Skeinwinder - Table Mounting
This lacquer finished skein winder attaches to a table and folds when not in use. Sorry no photo up yet....

Louet Spinning Wheel Bearing
Louet Spinning Wheel Bearing

Louet Brake Tension Bolt only
Louet Brake Tension Bolt only

Louet Footman Connector
Louet Footman Connector

Louet Bobbin Bearing (6mm) for all wheels except Victoria and Julia
Louet Bobbin Bearing - 6mm for all wheels except Victoria and Julia

Louet Footman to Treadle Connector
Louet Footman to Treadle Connector

Louet Bulky Bobbin
Louet Bulky Bobbin for use with Louet Bulky Flyer.

Louet Wheel Nuts - Black
Louet Wheel Nuts - Black

Louet Lazy Kate Tips
Louet Lazy Kate Tips

Victoria High Speed Spinning Set - Beech

Victoria High Speed Set- Beech - This high speed set for the Victoria contains a flyer, 3 bobbins, a small whorl (you have to add this to the existing whorl) and a hook for threading the yarn through the orifice and the flyer hole. The image is of

Louet Victoria Carry Bag
VICTORIA BAG - (does not come with wheel) The Victoria bag can be carried as a hand bag, a shoulder bag or a back pack.

Louet Art Yarn Flyer
The new Art yarn flyer is now available. Orifice and yarn guide of this new flyer are about 3/4�. The edges where the yarn passes are rounded off. This flyer is optimal for spinning yarns with large differences in thickness, structure and unusual c